OSHA Compliance Training Guide

According to the Bureau of Labor Statistics, 4,679 workers were killed on the job in America in 2014, which equates to 90 workers being killed every week, and 13 work-related deaths occurring every single day. More than 20 percent of these deaths, or 874 of them, occurred in the construction industry. Approximately 58 percent of these construction-related deaths were caused by one of the following four occurrences:

The Best Safety Glasses and Equipment for Arc Flash Protection and PPE

According to data compiled by the Centers for Disease Control and Prevention, 5 to 10 arc flash explosions occur in electric equipment across the United States each day. Facilities with dense power structures and high levels of potential energy tend to have prime conditions for arc flash events, including substations, data centers, and similar environments. An arc flash releases a significant amount of electrical energy and occurs because of equipment failure contamination, dust, dropped tools and corrosion equipment failure, inadvertent contact with energized parts, dropped tools and several other causes.

NFPA’s 70E Standard for Electrical Safety Is Changing with the Times, and You Should Too

The U.S. Bureau of Labor Statistics reports there were 2,000 fatal and more than 24,000 non-fatal work-related electrical injuries between 2005 and 2015, including those sustained from an arc flash. That’s about one fatality a day out of 11 total work related deaths per day, according to The National Safety Council. Arcing caused by an electrical fault is not to be taken lightly — it can produce temperatures of more than 10,000 F (5,500 C), which is hotter than the surface of the sun. It can cause an explosion with enough force to fling a worker’s body across the room.

Glossary of Arc Flash Terms

Arc flash terminology can be a foreign language. We’ve compiled this glossary of arc flash terms to help you understand the arc flash testing process. We’ve also defined key equations and summarized important regulations.

Arc Flash. Also known as an arc blast, an arc flash is an explosive release of energy caused by a current passing between two points. Arc flashes usually result from dust, damage, improper installation or accidental contact with electrical systems.

How To Avoid Common Electrical Safety Injuries

It’s a sad truth that electrical accidents happen — and that they happen with frequency. For the 20 years spanning 1992 and 2013, the U.S. Bureau of Labor Statistics (BLS) reports that there were almost 6,000 on-the-job electrical injuries that resulted in death. Moreover, in the 10 years between 2003 and 2012, there were 24,100 non-fatal electrical injuries. These numbers show that electrical safety has to be constant priority for every professional electrician.

Electrical Safety In The Workplace

Recently, the Occupational Safety and Health Administration, better known as OSHA, released a new version of the agency’s Job Safety and Health: It’s the Law! poster. Most people who have entered a work environment would recognize this poster, which summarizes an employee’s right to a safe workplace and the employer’s legal obligation to provide a safe and healthy work environment.

Most Expensive Electrical Citations

If your organization relies on heavy machinery or requires any sort of electrical work or electrical machinery, violating standards such as NFPA 70E could result in an expensive fine from the Occupational Safety and Health Administration (OSHA).  

Electrical Safety Tips

An electric shock can kill or maim an electrician for life. Workplace safety is a legal responsibility, but for those who work with electricity, it is doubly important. Electricity is one of the most lethal elements any worker will ever have to deal with, and it must be treated with respect.

Common-sense precautions are important defenses against electrical accidents, but these are not always enough. Fortunately there are institutions out there that can help your company and team put together safe working practices.

Energy Wars

A long time ago, in a galaxy far away, Obi-Wan Kenobi attempted to explain The Force to a young Luke Skywalker. He described it as something that surrounds us and binds the universe together. It’s true that forces, created by energy and matter, are what bind the universe together.

Wind Turbine Tech Career FAQs

The wind turbine technicians of the world do an important job. They get and keep the blades turning to generate renewable energy. They master the wonders of electricity, as well as enormous machines and all of their parts. Wind turbine technicians install or repair wind turbines and maintain productivity and profitability for their company.